ROTARY DAMPERS

Rotary damper - TD118 SERIES

TOK - TD118 rotary damper

FEATURES
➢ Damping direction: CW / CCW
➢ TD118 series dampers can be covered the torque value through 3.5N･m at maximum even though all of the material plastic used.
➢ RoHS compliance

TORQUE VALUE
1.5 - 3.5 N･m

  • image

  • TD118A1 (CW)
    Operation angle (Open position)
    image

    The above drawing shows operation angle of TD118A1 series dampers. Operation angle of TD118B1 series is symmetrical to the vertical line. Shaft position at the time of shipment is closed position.

  • image

  • image

DURABILITY

Each damper is set-up with an applied torque and weight on the shaft of the testing device. Measurements for closing time are taken under above condition.
  • image

  • image

    TEST CONDITION
    ①Setting-up time: 20 sec/cycle
    ②Load torque:
    - 1.5 N･m (15kgf･cm)
    - 2.0 N･m (20kgf･cm)
    - 2.5 N･m (25kgf･cm)
    - 3.0 N･m (30kgf･cm)
    - 3.5 N･m (35kgf･cm)
    ③Temperature: 23℃±2℃
    ④Angle for measuring the closing time: 70° → 0°
    ⑤Radial force: nothing
    ⑥Closing time after durability test: 1 sec or more

TEMPERATURE CHARACTERISTICS

image

After the damper is stabilized at room temperature for 1 hour or more, the closing time is measured using TOK in-house device.

REQUEST A QUOTE
CAD DOWNLOAD
CATALOG